The company has inhouse radiography setup with the film developing facilities that follows ASTM E1742 standard. The parts are inspected as per ASTM E 155 standard. The company is capable of producing aluminium castings at Level 1 for the internal defects. Our inspectors are highly qualified and skilled to provide perfect interpretation of results. For specific requirements, the reports are maintained for upto 10 years and in some cases more. The NDT department works closely with the development team to deliver results required by customer depending on the end usage.
Radiographic Testing (RT) is a volumetric non-destructive evaluation (NDE) technique that helps to detect internal defects in castings, welds etc., which could not be detected by other NDE techniques like fluorescent penetrant, magnetic particle testing.
Read More >>
Helium Leak Testing
Using Helium to check leak in parts is highly effective compared to leak testing using normal atmospheric air. Helium Leak Testing is a type of non-destructive quality control testing of manufactured parts to ensure fluids do not leak into or out of the part. Depending on the material of the part and the criticality of the application of the part, leak rates to the extent of
Read More >>
Liquid Penetrant Test
Liquid Penetrant Inspection (LPI) / Dye Penetrant test (DP) shows the surface defects on the castings. The parts have to be carefully cleaned before the process to give more accurate results. The liquid penetrant can be Fluorescent type ( FPI ) or @@@@ type